set port trap |
|
Enable or disable SNMP Link Up and Link Down traps notifications and traps on a port. |
set snmp trap enable | disable auth |
|
Enable or disable SNMP authentication failure traps. |
show port trap |
|
Display information on SNMP generic Link Up and Link Down traps sent for a specific port or for all ports. |
show snmp |
|
Display SNMP configuration information. |
snmp-server test trap |
|
Sends a test trap to the configured trap receivers. |
interface {dialer | FastEthernet See IP interface configuration |
|
Enter the context of the Dialer, FastEthernet, Tunnel, or USB-modem interface. |
|
snmp trap link-status |
Enable or disable Link Up and Link Down traps on an interface. |
snmp-server enable notifications |
|
Enable or disable the sending of all traps and notifications from the Branch Gateway. |
snmp-server host |
|
Identify an SNMP management server, and specify the messages it receives. Use the no form of the command to remove the specified server, or to disable a particular set of notification types. |
snmp-server informs |
|
Configure the SNMPv3 timeout and retries for notifications. |
