copy usb announcement-file

Last Updated : Jun 03, 2021 |

Downloads an announcement file from the external USB mass storage device to the gateway.

Note:

If you install increased RAM, the command works only if an announcement file system exists. An announcement file system is created when one of the following occurs:

  • The gateway is registered to Communication Manager, and at the SAT interface of the Communication Manager, you enter enable announcement-board.

  • You run a backup or restore operation (without reset).

Syntax

copy usb announcement-file source-usb-device source-filename [destination-filename]

Parameters

Parameter

Description

Possible Values

Default Value

source usb-device

The source USB mass storage device

usb-device0

source-filename

The full name and path of the file to be downloaded

destination-filename

The destination filename (no path)

User level

read-write

Context

general

Example

To download announcement_file1.wav from usb-device0 to the gateway and name it local_announcement_file2.wav:

Gxxx-001(super)# copy usb announcement-file usb-device0 \temp\
announcement_file1.wav local_announcement_file2.wav