Provides a dial tone in response to far-end trunk group seizures in SLS.
Note:
This command applies only to digital DS1 trunks set up for inband signaling.
Syntax
set incoming-dialtone {yes | no}
Parameter
Description
Possible Values
Default Value
yes
A keyword indicating to provide a dial tone
no
A keyword indicating trunks that are not sending digits, for example, an incoming call on a loop-start central office trunk. This is the default value.
User level
read-write
Context
sls > trunk-group
Example
To withhold a dial tone:
Gxxx-001 (sls-trunk-group-<tgnum>)# set incoming-dialtone no
