rtp-stat fault

Last Updated : Nov 06, 2012 |

Configures the RTP statistics application to send QoS fault or clear traps. A QoS fault trap is sent when a specified number of active RTP sessions have QoS indicators over the configured thresholds. A QoS clear trap is sent after a QoS fault trap when the number of active RTP sessions with QoS indicators over the configured thresholds reduces to a specified number. QoS fault and clear traps are enabled by default.

Syntax

rtp-stat fault [fault [clear]]

[no] rtp-stat fault

Parameters

Parameter

Description

Possible Values

Default Value

fault

The fault trap boundary. If the number of active sessions with QoS faults reaches the fault trap boundary, a QoS fault trap is sent.

1-100

3

clear

The clear trap boundary. If the number of active sessions with QoS faults reduces to the clear trap boundary after a QoS fault trap was sent, a QoS clear trap is sent.

0-99

User level

read-write

Context

general

Example

To set the fault trap boundary to 1 and the clear trap boundary to 0:

Gxxx-001(super)# rtp-stat fault 1 0
The fault trap boundary was set to 1 (default: 3)
The clear trap boundary was set to 0