Uploads an announcement file from the Branch Gateway announcement directory to a remote FTP server. The files can then be downloaded from the FTP server to Avaya Voice Announcements Manager (VAM).
Note:
If you install increased RAM, the command works only if an announcement file system exists. An announcement file system is created when one of the following occurs:
The gateway is registered to Communication Manager, and at the SAT interface of the Communication Manager, you enter enable announcement-board.
You run a backup or restore operation (without reset).
Syntax
copy announcement-file ftp source-filename ip [destination-filename]
Parameters
Parameter
Description
Possible Values
Default Value
source-filename
The name of the announcement file in the Branch Gateway announcement directory. If the file name includes spaces, use quotes.
ip
The IP address of the remote FTP server
destination-filename
The destination file name, including full path, if a name change is required. If the file name includes spaces, use quotes.
up to 32 characters for the file name
User level
read-write
Context
general
Example
To upload local_announcement2.wav from the announcements directory to a remote FTP server with IP address 192.168.49.10, place it in the C drive, and name it remote_announcement2.wav:
