capture buffer-mode |
|
|
Set the capture buffer to cyclic mode. |
capture buffer-size |
|
|
Change the size of the capture file. |
capture filter-group |
|
|
Activate a capture list. |
capture interface |
|
|
Specify a capture interface (by default, the service captures from all interfaces simultaneously). |
capture ipsec |
|
|
Set whether to capture IPSec VPN packets, handled by the internal VPN process, decrypted (plaintext) or encrypted (cyphertext). |
capture max-frame-size |
|
|
Set the maximum octets that are captured from each frame. |
capture start |
|
|
Start capturing packets.. |
capture stop |
|
|
Stop capturing packets. |
capture-service |
|
|
Enable or disable the capture service. |
clear capture-buffer |
|
|
Clear the capture buffer (useful in case it holds sensitive information). |
copy capture-file ftp |
|
|
Upload the packet sniffing buffer to a file on a remote FTP server. |
copy capture-file scp |
|
|
Upload the packet sniffing buffer to a file on a remote SCP server. |
copy capture-file tftp |
|
|
Upload the packet sniffing buffer to a file on a remote TFTP server. |
copy capture-file usb |
|
|
Upload the capture file to a USB mass storage device. |
copy capture-file https |
|
|
Upload the packet sniffing buffer to a file on a remote HTTPS server . |
copyedge capture-file scp |
|
|
Upload the packet sniffing buffer to a file on a remote SCP server through Avaya SBC tunnel. |
ip capture-list |
|
|
Enter the capture list configuration context, create a capture list, or delete a capture list. |
|
cookie |
|
Set a number to identify a list (used by the rule-manager application). |
|
ip-rule (policy, policy-based routing, packet sniffing) |
|
Enter an ip-rule context or erase an ip-rule. |
|
|
composite-operation |
Create or edit a composite operation. |
|
|
destination-ip |
Define an equation on the destination IP. |
|
|
dscp (policy-based routing, packet sniffing, VPN) |
Specify the DSCP value to be set by the current IP rule. |
|
|
fragment |
Apply the current rule to non-initial fragments only. |
|
|
icmp |
Set the IP protocol to ICMP and an equation on the types of ICMP messages. |
|
|
ip-protocol |
Set the IP protocol. |
|
|
show ip-rule |
Display the attributes of a specific rule. |
|
|
source-ip |
Set the current rule to apply to packets from the specified source IP address. |
|
|
tcp destination-port |
Set the IP protocol to TCP and an equation on the destination port. |
|
|
tcp source-port |
Set the IP protocol to TCP and an equation on the source port. |
|
|
udp destination-port |
Set the IP protocol to UDP and an equation on the destination port. |
|
|
udp source-port |
Set the IP protocol to UDP and an equation on the source port. |
|
name |
|
Name a capture list. |
|
owner |
|
Set the name of the person or application that has created the list. |
show capture |
|
|
Show the sniffer status. |
show capture-buffer hex |
|
|
Show a hex-dump of the captured frames. |
show ip capture-list |
|
|
Show capture list(s). |
