Last Updated : Aug 25, 2023 |
Table 1: IPv6 configuration commands

Root-Level Command

First-Level Command

Description

ipv6 default-gateway

Define the default IPv6 gateway .

ipv6 icmp destination-unreachable

Enable generation of ICMPv6 Destination Unreachable messages.

ipv6 icmp echo-reply

Enable replies to ICMPv6 Echo Request messages sent to a multicast address.

ipv6 icmp in-rate-limit

Limit ingress rate of ICMPv6 messages.

ipv6 icmp out-rate-limit

Limit egress rate of ICMPv6 messages.

ipv6 icmp redirect

Accept ICMPv6 Redirect messages.

ipv6 nd dad attempts

Set IPv6 Duplicate Address Detection Transmits.

ipv6 nd timeout

Set IPv6 neighbors timeout.

ipv6 route

Add a static route for a remote IPv6 network.

interface vlan

ipv6 address

Set an IPv6 address for this interface.

interface vlan

ipv6 admin-state

Set the administrative state of this IPv6 interface.

interface vlan

pmi6

Set this interface's global (or link-local) IPv6 address to be the IPv6 primary management interface.

show ipv6 icmp

Display status of ICMPv6 variables.

show ipv6 interface

Display interfaces IPv6 information.

show ipv6 nd config

Display IPv6 neighbor discovery configuration.

show ipv6 neighbors

Display IPv6 neighbor cache entries.

show ipv6 route

Display the IPv6 routing table.

set qos rtcp monip6

Sets RTCP monitor IPv6 address.

ping6

Ping6 utility.

traceroute6

Traceroute utility for IPv6.

show ipv6 traffic

Display IPv6 counters.

clear ipv6 traffic

Clear IPv6 counters.

show ipv6 route static

Display static IPv6 routes.

show tcp connections ipv6

Display the TCP connection status over IPv6.