Creates a list of valid Media Gateway Controllers. The user can configure up to four IP address pairs or four FQDN separated by commas.
When the Media Gateway is operating in Edge mode, use sbc@ before the IP address pair and FQDN. This shows that the Media Gateway is connected to Avaya SBC.
Note:
The set mgc list command appends the new controllers to the existing list of controllers, if any.
Syntax
set mgc list <controller entry>
Parameters
Parameter
Description
Possible Values
Default Value
controller entry
The IP address of the call controller that includes enterprise and edge mode configuration
IPv4 address
IPv6 address
IPv4 address+IPv6 address
FQDN
sbc@FQDN
sbc@ipv4
sbc@ipv6
sbc@ipv4+ipv6
User level
read-write
Context
general
Example
To specify a media gateway controller where Enterprise Mode is enabled:
Gxxx-001(super)# set mgc list 10.129.176.177, OakstreetCM.acme.com
To specify a media gateway controller where Edge Mode is enabled:
Gxxx-001(super)# set mgc list sbc@productidDC1.customerid.avayacloud.com, sbc@productidDC2.customerid.avayacloud.com
