Sets the priority level of a port or range of ports on the switching bus. Packets traveling through a port set at normal priority are served only after packets traveling through a port set at high priority are served.
Syntax
set port level module/port [value]
Parameters
Parameter
Description
Possible Values
Default Value
module
Number of the module
port
Number of the port on the module. You can also specify a range of ports separated by a dash. For example:10/3-4 for both ETH LAN ports on the front panel.
value
Priority level
0-7
User level
read-write
Context
general
Example
To set the priority level of port 6/5 to 5:
Gxxx-001# set port level 6/5 5
Port 6/5 level set to 5
