Specifies the responder port for the crosstalk port. A responder answers an incoming call and then plays a sequence of tones. The tones are used by test equipment at the other end of the loop to make measurements. The responder can be a port in the media module, or the Local Exchange Carrier (LEC).
Note:
Once you specify a responder port on the gateway, the crosstalk responder type is test 100 and cannot be modified.
Syntax
set crosstalk-responder {{slot port} | none}
Parameters
Parameter
Description
Possible Values
Default Value
slot
Number of the slot, represented as a number preceded by the letter v. For example, slot 1 is represented as v1.
A slot with an analog media module
port
Number of the port on the module, represented as two digits. For example, port 2 is represented as 02.
If you set the crosstalk-port to be the responder port, the crosstalk port plays the role of the responder.
Any analog trunk port, including DID trunk ports
none
A keyword specifying that the Local Exchange Carrier (LEC) plays the role of the responder
User level
admin
Context
analog-test-profile
Example
Gxxx-001(analog-test-measure3)# set crosstalk-responder v306
