show logging file content

Last Updated : Feb 07, 2020 |

Outputs the messages in the log file to the CLI console. The output is arranged with the most recent event first. The content of the file is output according to the current filter settings and user access. If no parameters are specified, information for all message facilities and severities is displayed.

Syntax

show logging file content [severity] [all|Msgfacility] [number]

Parameters

Parameter

Description

Possible Values

Default Value

severity

Minimal severity of messages to be displayed

all

Keyword specifying to display messages from all facilities

Msgfacility

Display messages from this facility only

number

Maximum number of messages to display

User level

admin

Context

general

Example

To display contents of the message file for all message facilities and severities:

Gxxx-001(super)# show logging file content
<187>Jan 12 13:48:11 G4xx -NoTag: -NoUTC 2011 485 1 mediagateway.g450 | 0 CCI-SK
TMAJNO[VOICE-Error: CC Connection (H): Far end dropped H248: 0x3b:0:ad, ID=N/A

<187>Jan 12 13:48:00 G4xx -NoTag: -NoUTC 2011 480 1 mediagateway.g450 | 0 GWG-ST
AMAJNO[VOICE-Error: closeConnection(): Schedule socket closure: reason=0x24, ID=
N/A

<190>Sep 14 10:29:34 G4xx -NoTag: -NoUTC 2010 995 1 mediagateway.g450 | 0 BOOT M
ESSAGE[BOOT-Informational: Booting from bank B with firmware version 31.16.2, ID
=N/A

<190>Sep 14 10:29:34 G4xx -NoTag: -NoUTC 2010 995 1 mediagateway.g450 | 0 coldSt
art[BOOT-Informational: System boot up from cold reset, ID=N/A