AVAYA DOCUMENTATION CENTER
Find answers to your technical questions and learn how to use our products
Deploying Avaya Wireless DECT with IP Office
Configuring IP Trunks
An IP trunk to the IP Office must be configured. Only one trunk is supported.
- In the left-hand panel select DECT, and then select the Trunks tab.
ADDITIONAL INFORMATION:
- Enter the following settings:
ADDITIONAL INFORMATION:
-
Name: Set a name that identifies the IP Office system.
-
Local Port: Set this to 1720.
-
CS IP Address: Set this field to the IP address of the IP Office system.
-
CS Port : Set this to 1720.
-
- Click OK.
ADDITIONAL INFORMATION:
-
The message Reset required! is displayed. At this stage further changes are required so do not reset the base station.
-