Once the master base station has been configured and is connected to the IP Office, you can begin phone subscription.
There are two methods of phone subscription; pre-configured or auto-create.
The pre-configured method requires the DECT users to be pre-configured in the master base station configuration.
The auto-create method does not require users to be pre-configured if the auto-create users checkbox is enabled in the IP-DECT Line, Gateway tab.
In both cases, the IP Office configuration should also contain available Avaya IP Endpoint Licenses. The PARK code and Authentication Code of the Avaya Wireless DECT system are required during subscription. The values set on the IP DECT line in the IP Office configuration are used.
Note:
This method makes changes to the IP Office system configuration. Ensure that no copies of the configuration are open in Manager during subscription as sending that configuration back to the IP Office system will remove the subscriptions and require the handsets to be resubscribed.
