AVAYA DOCUMENTATION CENTER
Find answers to your technical questions and learn how to use our products
Deploying Avaya Wireless DECT with IP Office
Installing the Digital Base Stations
Apart from the physical connection and power requirements, no configuration is required. The appropriate firmware files are automatically provided to the base stations by the IP DECT Gateway.
Use the following cable pin-out to prepare the cable for connecting the digital base station to the IP DECT Gateway. Remember to allow sufficient cable length to allow for any potential repositioning of the base stations that may be required.
|
Base Station
|
Pin
|
MDI (Crossover)
|
Wire
|
Note
|
|---|---|---|---|---|
|
1
|
Power
|
White/Orange
|
Only connection if using the IP DECT Gateway for power. Refer to Digital Base Station Power Consumption.
|
|
2
|
Power
|
Orange/White
|
||
|
3
|
Data 1a
|
White/Green
|
—
|
|
|
4
|
Data 0a
|
Blue/White
|
—
|
|
|
5
|
Data 0b
|
White/Blue
|
—
|
|
|
6
|
Data 1b
|
Green/White
|
—
|
|
|
7
|
Not used
|
White/Brown
|
—
|
|
|
8
|
Not used
|
Brown/White
|
—
|