Digital Base Station Power Consumption

Last Updated : May 11, 2023 |
The IP DECT Gateway can be used to power digital base stations via the same cable connection as used for signalling. However, the maximum power provision of the IP DECT Gateway is 15W and the power consumption of each digital base station is dependent on the cable wire size and length. The table below indicates the power consumption and can be used to calculate if the IP DECT Gateway can directly power the digital base stations. In cases where the IP DECT Gateway cannot directly power all the digital base stations, some of the base stations will need a separate power connection.
Cable Length
0.4mm Wire Diameter
0.5mm Wire Diameter
0.6mm Wire Diameter
0 EPP
1 EPP
0 EPP
1 EPP
0 EPP
1 EPP
0m
5.0
5.0
5.0
5.0
5.0
5.0
100m
5.2
5.1
5.1
5.1
5.1
5.1
200m
5.3
5.2
5.2
5.1
5.1
5.1
300m
5.6
5.3
5.3
5.2
5.2
5.1
400m
5.8
5.5
5.5
5.3
5.3
5.2
500m
6.1
5.6
5.6
5.4
5.4
5.2
600m
6.5
5.8
5.8
5.5
5.4
5.3
700m
7.1
6.0
6.0
5.6
5.5
5.3
800m
8.1
6.2
6.2
5.7
5.6
5.4
900m
—
6.5
6.5
5.8
5.7
5.4
1000m
—
6.9
6.9
5.9
5.8
5.5
1100m
—
7.3
7.3
6.1
5.9
5.6
1200m
—
8.1
8.1
6.2
6.1
5.6
1300m
—
—
—
6.4
6.2
5.7
1400m
—
—
—
6.6
6.4
5.8
1500m
—
—
—
6.9
6.6
5.8
The following power supply adapters are available to power a base station locally. The maximum length of cable from the adapter to the base station must not exceed 10 meters.
  • For European countries: Version 130137B.
  • For the United Kingdom: Version 130136B.
  • For the United States and Canada: Version 130138A.
  • For Australia: Version 130139B.
Related links
IP DECT Gateway Installation