Setting the DECT Password

Last Updated : Sep 06, 2022 |
The DECT system name and password are used by other base stations to connect to the master. The name also appears in other menus and on phone displays.
  1. Select DECT and then select the System tab.
    ADDITIONAL INFORMATION:
  2. Enter and confirm the password you want to use.
  3. The Subscriptions and Authentication Code fields should not be adjusted. These will be set by the IP Office once the base station is in provisioning mode.
  4. Check that the DECT Frequency field is set correctly for your location.
  5. Click OK.
Related links
Master Base Station Setup