Stamp Log

Last Updated : May 25, 2023 |
The stamp log function is used to insert a line into any System Monitor trace that is running. The line in the trace indicates the date, time, user name and extension plus additional information. The line is prefixed with LSTMP: Log Stamped and a log stamp number. When invoked from a Avaya phone with a display, Log Stamped# is also briefly displayed on the phone. This allows users to indicate when they have experienced a particular problem that the system maintainer want them to report and allows the maintainer to more easily locate the relevant section in the monitor trace.
The log stamp number is set to 000 when the system is restarted. The number is then incremented after each time the function is used in a cycle between 000 and 999. Alternately if required, a specific stamp number can be assigned to the button or short code being used for the feature.

Details

  • Action: Advanced | Miscellaneous | Stamp Log.
  • Action Data: Optional. Blank or any 3 digit number.
  • Default Label: Stamp Log.
  • Toggles: No.
  • Status Indication: No.
  • User Admin: No.
  • Phone Support: Note that support for particular phone models is also dependent on the system software level.
    • 9400 Series, 9500 Series, 9600 Series, and J100 Series.
    • 1400 Series and 1600 Series.
    • M-Series and T-Series.
      1. Not supported on T7000, T7100, M7100 and M7100N telephones.
    • 1100 Series and 1200 Series.