Find answers to your technical questions and learn how to use our products
Search suggestions:
Find answers to your technical questions and learn how to use our products
Search suggestions:
|
Field
|
Description
|
|---|---|
|
Auto-Create Extension
|
Default = Off.
If enabled, subscription of a handset with the Avaya Wireless DECT system causes the auto-creation of a matching numbered extension within the system configuration if one does not already exist. This setting is not supported on systems configured to use WebLM server licensing.
|
|
Auto-Create User
|
Default = Off.
This option is only usable if Auto-Create Extension is also enabled. If enabled, subscription of a handset with the DECT system causes the auto-creation of a matching user within the system configuration if one does not already exist.
|
|
Enable DHCP Support
|
Default = Off
This option is not used with Avaya Wireless DECT.
|
|
Boot File
|
Default = ADMM_RFP_1_0_0.tftp. Range = Up to 31 characters.
This option is not used with Avaya Wireless DECT.
|
|
ADMM MAC Address
|
Default = 00:00:00:00:00:00
This option is not used with Avaya Wireless DECT.
|
|
VLAN ID
|
Default = Blank. Range = 0 to 4095.
This option is not used with Avaya Wireless DECT.
|
|
Base Station Address List
|
Default = Empty
This option is not used with Avaya Wireless DECT.
|
|
Enable Provisioning
This option can be used with Avaya Wireless DECT systems. It allows the setting of several values in the IP Office system configuration that previously needed to be set separately in the master base stations configuration.
The use of provisioning requires the system security settings to include an IPDECT Group. For full details, see the Deploying Avaya Wireless DECT with IP Office manual.
|
|
|
SARI/PARK
|
Default = 0
Enter the PARK (Portable Access Rights Key) license key of the Avaya Wireless DECT system.
|
|
Subscriptions
|
Default = Disabled
Select the method of subscription supported for handsets subscribing to the Avaya Wireless DECT system. The options are:
|
|
Authentication Code
|
Default = Blank.
Set an authentication code that DECT handset users should enter when subscribing to the DECT system.
|
|
Enable Resiliency Default = Off.
Enables resiliency on the IP DECT Line. To configure resiliency, you must also configure an IP Office with Backs up my IP Dect Phones set to On.
|
|
|
Status Enquiry Period
|
Default = 30 seconds.
The period between successive verifications on the H.323 channel. The smaller the interval, the faster the IP DECT system recognizes that IP Office is down.
|
|
Prioritize Primary
|
Default = Off.
Set to On for automatic failover recovery. When on, the Avaya Wireless DECT system switches automatically from the backup IP Office to the "primary" IP Office.
Only available when Enable Provisioning is set to On.
|
|
Supervision Timeout
|
Default = 120 seconds.
The period of time the Avaya Wireless DECT system will wait between attempts to switch from the backup IP Office to its "primary" IP Office.
Only available when Enable Provisioning is set to On.
|