This process configures the SIP line specific settings for calling number verification.
Prolog information
Metadata
Keywords:
Access the SIP line's settings and select the SIP Advanced tab.
In the Calling Number Verification section, set the required behavior:
ADDITIONAL INFORMATION:
Field
Description
Calling Number Verification
Default = Off
Sets whether the line uses calling number verification.
Incoming Calls Handling
Default = Allow Not Failed
Set which calls are accepted by the system based on the attestation level of the call.
System - Use the default system setting (System VoIPVoIP SecurityCallng Number Verification).
Allow All - Allow all calls regardless of calling number verification.
Allow Validated - Only accept verified calls with full or partial attestation.
Allow Not Failed - Accept all calls expect those that specifically failed verification. Note this can include calls with no reported verification result.
