IP Office can provide a MWI for analog trunks from the PSTN network that terminate on an ATM4U-V2 card. Multiple users can be configured to receive a MWI from a single analog line. Users can receive an MWI from multiple lines. Configuring a user for MWI includes configuraton of a button for automatically dialing the message center.
Note the following conditions.
-
Only supported for analog trunks terminating on the ATM4U-V2 card.
-
When Analog Trunk MWI is selected as the Voicemail Type, no other voicemail system is active. As a result, hunt group queue announcements are not supported, since they require Embedded Voice Mail or Voicemail Pro.
-
All analog trunks configured for MWI must use the same message center number. Multiple message centers are not supported.
-
Not supported in One-X Portal.
-
No TAPI is provided for analog trunk MWI status.
-
Not supported across multiple IP Office systems. If the analog line is on a different node than the user’s phone, that phone cannot receive an MWI for the line.
-
Mobile twinning is not supported. Analog trunk MWI is displayed only on the master set.
-
Internal twinning is not supported automatically. However, the twinned set can be configured to receive the same analog trunk MWI as the master set.
