These settings are for Frame Relay configuration.
These settings are not mergeable. Changes to these settings will require a reboot of the system.
|
Field
|
Description
|
|
Frame Management Type
|
This must match the management type expected by the network provider. Selecting AutoLearn allows the system to automatically determine the management type based on the first few management frames received. If a fixed option is required the following options are supported:
-
Q933 AnnexA 0393
-
Ansi AnnexD
-
FRFLMI
-
None
|
|
Frame Learn Mode
|
This parameter allows the DLCIs that exist on the given WAN port to be provisioned in a number of different ways.
-
None No automatic learning of DLCIs. DLCIs must be entered and configured manually.
-
Mgmt Use LMI to learn what DLCIs are available on this WAN.
-
Network Listen for DLCIs arriving at the network. This presumes that a network provider will only send DLCIs that are configured for this particular WAN port.
-
NetworkMgmt Do both management and network listening to perform DLCI learning and creation.
|
|
Max Frame Length
|
Maximum frame size that is allowed to traverse the frame relay network.
|
|
Fragmentation Method
|
The options are:
|
