Starting the Communication Manager Messaging application manually

Last Updated : Apr 23, 2014 |

About this task

Use this procedure to manually start the Communication Manager Messaging application.

Procedure

  1. Using a pointed object such as a paper clip or a pen (do not use a pencil), press and hold the Boot/Shutdown button until the display indicates the message BTEST steady on.
  2. Release the Boot/Shutdown button.

    The Communication Manager Messaging application takes approximately five minutes to start. The display has the following sequence of steady-on messages:

    • OSINIT

    • OS

    • AINIT

    • ADX

    The Communication Manager Messaging application is now started. When the system is in the active state, the display indicates ADX, and the red LED is off.

  3. When turning on, the Communication Manager Messaging application automatically reboots. This sequence may show an MD or MJ ADX alarm in the display until the application has turned on. When the system has completed its booting up sequence, the display reads ADX.