Testing failed IP network regions

Last Updated : Apr 21, 2014 |

About this task

You can use the test failed-ip-network-region #|all command to initiate a real-time ping test for all failed network-regions connections. If there are no failed network-region connections, the network region connection warning alarm is cleared. Use this procedure to test failed IP network regions.

Procedure

  1. Type test failed-ip-network-region #|all and press Enter to begin the test.

    System displays the following Test Results screen at end of the test:

    
                         TEST RESULTS
Port   Mtce Name    Alt.Name   Test No.   Result            Error Code
       NR-CONN      XXX-YYY    ZZZ        PASS/FAIL/ABORT
  2. Review the test results.

    • NR-CONN represents the Maintenance Object Name for this test.

    • XXX-YYY represents the pair of failed network regions being tested.

    • ZZZ represents the test number.

    • Result will be PASS, FAIL, or ABORT.

    • Error Code lists a numeric value in the case of FAIL or ABORT.

  3. Exit the screen.