Accessing system logs through the Web interface

Last Updated : Apr 24, 2014 |

About this task

Use this procedure to access the system logs through the System Management Interface (SMI) to the Linux server.

Procedure

  1. Enter the server IP address in your browser’s Address field and press Enter.
  2. Click Continue.
  3. At the notification of a secure connection, click OK.
  4. Click OK to accept the security certificate.

    The System Management Interface (SMI) logon page displays.

  5. Type your login ID (administered login) in the Logon ID field.
    Note:

    If you are using ASG authentication, start the ASG Soft Key application on your laptop.

  6. ASG only: the Challenge field is pre-populated; type this number without the hyphens into the ASG Soft Key application’s Challenge field. Click on the Response button.
  7. Leave the Product ID field blank (for Avaya use only).
  8. ASG only: the ASG Soft Key application displays a number the Response field; type this number into the Response field (hyphens permitted in this field) on the Web interface and click on the Logon button.
  9. Answer Yes to suppressing alarm origination.

    The System Management Interface (SMI) page displays.

  10. On the System Management Interface (SMI) page, select Administration > Server (Maintenance).
  11. In the left-side navigation pane, select Diagnostics > System Logs.

    The System Logs page displays. Your system might show a different view depending on your configuration.