Installing BIU or rectifier

Last Updated : Apr 28, 2014 |

About this task

To install a BIU or rectifier, first attach a grounding strap from the cabinet to your bare wrist, and then perform this procedure.

Procedure

  1. Insert the back edge of the BIU or rectifier, making sure that it is horizontally aligned.

    Slide the unit into the slot until it engages the backplane. Use extreme care in seating the backplane connectors.

  2. Lift the locking lever until the latch pin engages.
  3. Verify that the unit is seated correctly by observing the operation of the LEDs.