Configure the basic network settings, such as IP address assignment, the use of a Wi-Fi network, and proxy server configuration. When configuring IP settings, you can determine whether to choose automatic or static address assignment and select the version of the IP protocol.
Before you begin
To access and configure Wi-Fi settings on the Wireless Network tab, ensure that you have enabled the Wi-Fi capability from the System Security submenu of the Settings web interface menu.
Procedure
On the Settings menu, select Network.
On the Wired Network tab, for the Acquisite Way setting, select one of the following options:
Static IP: You manually specify the IP address and other related settings.
Auto Obtain: The codec obtains the IP address from the DHCP server.
For the Category setting, select the IP protocol version to use.
If you selected manual IP assignment, in the IP Address field, enter the codec IP address.
In the Netmask field, enter the subnet mask address.
In the Gateway field, enter the default gateway IP address.
In the DNS1 Address field, enter the primary DNS server IP address.
In the DNS2 Address field, enter the secondary DNS server IP address.
The secondary DNS server IP address is used if the primary DNS server is unavailable.
Go to the Wireless Network tab.
If you purchased a Avaya Room System C190 model without the Wi-Fi capability, the Wireless Network tab and the Wi-Fi settings in steps 10–11 are unavailable.
To switch from an Ethernet connection to a Wi-Fi network, for the WIFI Status setting, select Open.
To connect to a different Wi-Fi network, select Other Networks.
Go to the Proxy Settings tab.
To use a proxy server for the codec, for the Use Proxy setting, select Open.
Select Confirm to save the configuration and return to the Settings menu.
