set port edge admin state |
Assign or de-assign RSTP edge-port admin state to a port for Rapid Spanning Tree Protocol (RSTP) treatment |
set port point-to-point admin status |
Specify a port’s connection type |
set port spantree |
Enable or disable spanning tree for specific ports |
set port spantree cost |
Set the spanning tree cost of a port |
set port spantree force-protocol-migration |
Force the port to send a rapid spanning tree hello packet (Bridge Protocol Data Unit) |
set port spantree priority |
Set the spanning tree priority level of a port |
set spantree default-path-cost |
Set the version of the spanning tree default path cost used by the current bridge |
set spantree enable|disable |
Enable or disable the spanning-tree algorithm for Branch Gateway |
set spantree forward-delay |
Specify the time used when transferring the state of a port to the forwarding state |
set spantree hello-time |
Specify the time interval between the generation of configuration BPDUs by the root |
set spantree max-age |
Specify the time to keep an information message before it is discarded |
set spantree priority |
Set the bridge priority for the spanning tree |
set spantree tx-hold-count |
Set the value in packets used by the spanning tree in order to limit the maximum number of BPDUs transmitted during a hello-time period |
set spantree version |
Set the version of the spanning tree protocol used by the device |
show port edge state |
Display the edge state of a specified port |
show port point-to-point status |
Display the point-to-point status of a specific port or all ports |
show spantree |
Display spanning-tree information |
