The Auxiliary and Analog ports assigned to the station are as follows.
Valid Entry |
Usage |
x or X |
Indicates that there is no hardware associated with the port assignment since the switch was set up, and the administrator expects that the extension has a non-IP set. Or, the extension had a non-IP set, and it dissociated. Use x for Administered WithOut Hardware (AWOH) and Computer Telephony (CTI) stations, as well as for SBS Extensions. |
IP |
Indicates that there is no hardware associated with the port assignment since the switch was set up, and the administrator expects that the extension would have an IP set. This is automatically entered for certain IP station set types, but you can enter for a DCP set with softphone permissions. This changes to the s00000 type when the set registers. |
xxxVmpp |
Specifies the Branch Gateway.
xxx is the Branch Gateway number, which is in the range 001 to 999. m is the module number, which is in the range 1 to 9. pp is the port number, which is in the range 01 to 32. |
Analog Trunk port |
Analog trunk port is available with:
|
