Displaying the status of the Syslog server

Last Updated : Apr 16, 2019 |

Procedure

Enter show logging server condition followed by the IP address of the Syslog server.

If you do not specify an IP address, the command displays the status of all Syslog servers defined for the Branch Gateway.

Example

As the following example illustrates, the command displays whether the server is enabled or disabled, and lists all filters defined on the server:

Gxxx-001(super)# show logging server condition 10.129.179.178
******************************************************
Message logging configuration of SYSLOG sink ***
Sink Is Enabled
Sink default severity: Warning
Server name: 10.129.179.178
Transport Type: TLS
TLS state: connected
Port: 6514
Server facility: local7
Server access level: read-write