For more information about these commands, see Avaya Branch Gateway G430 CLI Reference.
Root level command |
Command |
Description |
interface (dialer| fastethernet| tunnel| usb-modem) |
- |
Enter the context of the Dialer, Fast Ethernet, Tunnel, or USB-modem interface |
- |
snmp trap link-status |
Enable or disable Link Up and Link Down traps on an interface |
set port trap |
- |
Enable or disable SNMP Link Up and Link Down traps notifications and traps on a port |
set snmp trap enable | disable auth |
- |
Enable or disable authentication failure traps for all managers |
set snmp trap enable | disable frame-relay |
- |
Enable or disable frame relay traps for all managers |
show port trap |
- |
Display information on SNMP generic Link Up and Link Down traps sent for a specific port or for all ports |
show snmp |
- |
Display SNMP configuration information |
snmp-server enable notifications |
- |
Enable or disable the sending of all traps and notifications from the Branch Gateway |
snmp-server host |
- |
Identify an SNMP management server, and specify the kind of messages it receives. Use the no form of the command to remove the specified server, or to disable a particular set of notification types. |
snmp-server informs |
- |
Configure the SNMPv3 timeout and retries for notifications |
