Summary of policy-based routing commands

Last Updated : Nov 06, 2012 |

For more information about these commands, see the Avaya Branch Gateway G430 CLI Reference.

Root level command

First level command

Second level command

Description

ip next-hop-list

Enter the context of the specified next hop list. If the list does not exist, it is created.

next-hop- interface

Add the specified interface to the next hop path for this next-hop list

next-hop-ip

Add the specified ip address to the next hop path for this next-hop list

show next-hop

Display the next-hop entries in the current list

interface

Enter the interface configuration mode for a Dialer, Loopback, Fast Ethernet, Tunnel or VLAN interface

ip pbr-group

Apply the specified PBR list to the current interface. The PBR list is applied to ingress packets only.

ip pbr-list

Enter the context of the specified PBR list. If the list does not exist, it is created.

cookie

Set the cookie for the current list

ip-rule

Enter configuration mode for the specified rule. If the specified rule does not exist, the system creates it and enters its configuration mode.

destination-ip

Specify the destination IP address of packets to which the current rule applies

dscp

Specify the DSCP value that is set by the current policy operation

fragment

Apply the current rule for non-initial fragments only

icmp

Apply the current rule to a specific type of ICMP packet

ip-protocol

Apply the current rule to packets with the specified IP protocol

next-hop

Specify the next-hop policy to use when the current rule is applied

show ip next-hop-list

Display the details of the next-hop list or of all next-hop lists

show ip-rule

Display the attributes of a specific rule or all rules

source-ip

Apply the current rule to packets from the specified source IP address

tcp destination- port

Apply the current rule to TCP packets with the specified destination port

tcp source-port

Apply the current rule to TCP packets from ports with specified source port

udp destination- port

Apply the rule to UDP packets with the specified destination port

udp source-port

Apply the rule to UDP packets from the specified source port

name

Assign a name to the specified list or operation

owner

Specify the owner of the current list

show ip-rule

Display the attributes of a specific rule or all rules

show list

Display information about the specified list

show ip active-lists

Display information about a specific policy list or all lists

show ip active-pbr- lists

Display details about a specific PBR list or all PBR lists

show ip pbr-list

Display information about the specified PBR list