Defining the USB-modem interface

Last Updated : Mar 13, 2020 |

About this task

Configure an IP address to the USB-modem interface to connect to Branch Gateway using a USB modem. Do not configure a subnet mask.

Procedure

  1. Type interface usb-modem to enter the USB-modem context.
  2. Use the ip address command to define a new IP address for the USB-modem interface.

Example

The following example shows the configuration of 10.3.3.2 as the IP address of the USB-modem interface:

Gxxx-001(super)# interface usb-modem
Gxxx-001(super-if:USB-modem)# ip address 10.3.3.2
Done!

The default IP address of the USB port is 10.3.248.253 255.255.255.252.