For more information about these commands, see Avaya Branch Gateway G430 CLI Reference.
Root level command
Command
Description
interface usb-modem
-
Enter USB-modem interface configuration context
-
async modem-init-string
Change the default modem initialization string
-
async reset-modem
Reset the connected modem. You can use this command from within an active PPP session over the USB modem
-
ip address
Assign an IP address and mask to an interface. This is the IP address to which a remote user can connect using SSH/Telnet.
-
ip peer address
Change the IP address offered to a requesting calling host during PPP/IPCP connection establishment. By default, the interface offers its own IP address plus one.
-
ppp authentication
Configure the authentication method used when starting a client session on the PPP server.
-
ppp chap-secret
Configure the shared secret used in PPP sessions with CHAP authentication
-
ppp timeout authentication
Set the maximum time to wait for an authentication response
-
show ppp authentication
Display PPP authentication status
-
shutdown
Disconnect an active PPP session and shut down the modem
-
timeout absolute
Set the number of minutes until the system automatically disconnects an idle PPP incoming session. By default, the timeout value is 10 minutes.
show interfaces
-
Display interface configuration and statistics for a particular interface or all interfaces
show interfaces
usb-modem
Display the USB-modem interface parameters, the current status of the USB port, and the identity of any USB modem connected to the USB port.
