To configure the Branch Gateway to activate contact closure when the feature access code is dialed:
Procedure
Enter the set contact-closure admin command.
In the following example, the command sets contact closure to work in relay 1 of the Avaya Partner Contact Closure Adjunct™ when activated by the call controller.
set contact-closure admin 10/1:1 mgc
Use the set contact-closure pulse-duration command to set the length of time for the relay to return to normal after the call controller triggers it.
In the following example, the command sets relay 2 of the Avaya Partner Contact Closure Adjunct™ to return to normal five seconds after the call controller triggers contact closure in the relay.
set contact-closure pulse-duration 10/1:2 5
Activating a contact closure manually
Procedure
Use the set contact-closure admin command with the parameter manual-trigger.
In the following example, the command activates contact closure in relay 1 of the Avaya Partner Contact Closure Adjunct™. Contact closure remains active until you deactivate it by using the set contact-closure admin command with the parameter manual-off or mgc.
set contact-closure admin 10/1:1 manual-trigger
Deactivating a contact closure manually
Procedure
Use the set contact-closure admin command with the parameter manual-off.
In the following example, the command deactivates contact closure in relay 2 of the Avaya Partner Contact Closure Adjunct™. Contact closure will not operate, even automatically, until you use the set contact-closure admin command to change the status of contact closure to mgc or manual-trigger.
