The show logging file content command displays the messages in the log file. Note that the user enabling the log sees only entered commands with a user-level no higher than the user’s privileges. A user with read-only privileges does not see entered commands that have a read-write user level.
(super)# show logging file content
<190>Aug 23 16:28:32 149.49.77.11 -NoTag: -NoUTC 2015 055 1
mediagateway.g430 | 0 coldStart[BOOT-Informational: System boot up
from cold reset, ID=e34d38263d29a5246ce93aa5b666f884
<187>Aug 23 16:28:32 149.49.77.11 -NoTag: -NoUTC 2015 525 1
mediagateway.g430 | 0 MSY-TRPMAJNA[VOICE-Error: No Call Controller
Found, ID=e34d38263d29a5246ce93aa5b666f884
<190>Aug 23 14:30:25 149.49.77.11 -NoTag: -NoUTC 2015 965 1
mediagateway.g430 | 0 BOOT MESSAGE[BOOT-Informational: Booting from
bank B with firmware version 29.22.50, ID=N/A
<190>Aug 23 14:30:25 149.49.77.11 -NoTag: -NoUTC 2015 965 1
mediagateway.g430 | 0 coldStart[BOOT-Informational: System boot up
from cold reset, ID=e34d38263d29a5246ce93aa5b666f884
<187>Aug 23 14:30:25 149.49.77.11 -NoTag: -NoUTC 2015 425 1
mediagateway.g430 | 0 MSY-TRPMAJNA[VOICE-Error: No Call Controller
Found, ID=e34d38263d29a5246ce93aa5b666f884
