coldStart

STD

Boot

Warning

coldStart

Agent Up with Possible Changes (coldStart Trap) enterprise:$E ($e) args($#):$*

A coldStart trap indicates that the entity sending the protocol is reinitializing itself in such a way as to potentially cause the alteration of either the agent's configuration or the entity's implementation.

warmStart

STD

Boot

Warning

warmStart

Agent Up with No Changes (warmStart Trap) enterprise:$E ($e) args($#):$*

A warmStart trap indicates that the entity sending the protocol is reinitializing itself in such a way as to keep both the agent configuration and the entity's implementation intact.

LinkUp

ifIndex, ifAdminStatus, ifOperStatus

STD

System

Warning

LinkUp

Agent Interface Up (linkUp Trap) enterprise:$E ($e) on interface $1

A linkUp trap indicates that the entity sending the protocol recognizes that one of the communication links represented in the agent's configuration has come up.

The data passed with the event is

1) The name and value of the ifIndex instance for the affected interface. The name of the interface can be retrieved via an snmpget of.1.3.6.1.2.1.2.2.1.2.INST, where INST is the instance returned with the trap.

linkDown

ifIndex, ifAdminStatus, ifOperStatus

STD

System

Warning

linkDown

Agent Interface Down (linkDown Trap) enterprise:$E ($e) on interface $1

A linkDown trap indicates that the entity that is sending the protocol recognizes a failure in one of the communication links represented in the agent's configuration.

The data passed with the event is

1) The name and value of the ifIndex instance for the affected interface. The name of the interface can be retrieved via an snmpget of.1.3.6.1.2.1.2.2.1.2.INST, where INST is the instance returned with the trap.

SNMP_Authen_

Failure

P330

SECURITY

Notification

authentic

Failure

Incorrect Community Name (authentication Failure Trap) enterprise:$E ($e) args($#):$*

An authentication failure trap indicates that the protocol is not properly authenticated.

risingAlarm

alarmIndex, alarmVariable, alarmSample Type, alarmValue, alarmRising Threshold

RMON

THRES HOLD

Warning

rising Alarm

Rising Alarm: $2 exceeded threshold $5; value = $4. (Sample type = $3; alarm index = $1)

The SNMP trap that is generated when an alarm entry crosses its rising threshold and generates an event that is configured for sending SNMP traps

fallingAlarm

alarmIndex, alarmVariable, alarmSample Type, alarmValue, alarmRising Threshold, alarmFalling Threshold

RMON

THRES HOLD

Warning

falling Alarm

Falling Alarm: $2 fell below threshold $5; value = $4. (Sample type = $3; alarm index = $1)

The SNMP trap that is generated when an alarm entry crosses its falling threshold and generates an event that is configured for sending SNMP traps

deleteSW Redundancy Trap

soft Redundancy Status

P330

SWITCH FABRIC

Info

deleteSWRedundancyTrap

Software Redundancy $1 definition deleted

The trap notifies the manager of the deletion of the specified redundant link, which is identified by the softRedundancyId. It is enabled/disabled by chLntAgConfigChangeTraps.

createSW Redundancy Trap

soft Redundancy Status

P330

SWITCH FABRIC

Info

createSWRedundancyTrap

Software Redundancy $1 definition created

The trap is generated on the creation of the redundant links for the specified ports. It gives the logical name of the redundant link the identification of the main and secondary ports and the status of the link. The softRedundancyId defines the instances of the above- mentioned variables. The trap is enabled/disabled by chLntAgConfigChangeTraps.

lseIntPortCAMLastChange Trap

lseIntPortCAMLastChange

P330

SWITCH FABRIC

Info

lseIntPort CAMLast Change Trap

CAM Change at $1

This trap reports of the occurred configuration changes. It is enabled/disabled by chLntAgCAMChangeTraps.

duplicateIP Trap

ipNetToMediaPhysAddress, ipNetToMediaNetAddress

P330

ROUTER

Warning

duplicateIPTrap

Duplicate IP address $2 detected; MAC address $1

This trap reports to the Management station on Duplicate IP identification. CRP identify the new IP on the network. If it similar to one of its IP interfaces, the CRP will issue a SNMP trap, containing the MAC of the intruder.

lntPolicy ChangeEvent

ipPolicy Activation EntID, ipPolicy ActivationList, ipPolicy Activationif Index, ipPolicy ActivationSub Context

P330

POLICY

Info

lntPolicyChangeEvent

Module $1 - Active policy list changed to $2

The trap reports a change in the active list specific for a policy-enabled box or module.

lntPolicy AccessControlViolationFlt

ipPolicy AccessControl

ViolationEnt ID, ipPolicy AccessControlViolationSrc Addr, ipPolicy AccessControl

ViolationDst Addr, ipPolicy AccessControl

Violation Protocol, ipPolicy AccessControl

Violation

L4SrcPort, ipPolicy AccessControl

ViolationL4DstPort, ipPolicy AccessControlViolation Established, ipPolicyRuleID, ipPolicyRule ListID, ipPolicy AccessControlViolationIf Index, ipPolicy AccessControl

ViolationSub Ctxt, ipPolicy AccessControl

ViolationTime

P330

POLICY

Warning

lntPolicy Access Control ViolationFlt

IP PolicyAccess Control violation, if-index$9 ip-protocol=$4 src-ip=$2 dst-ip=$3 src-port=$5 dst-port=$6 rule-id=$8 rule-list=$$9

This trap reports to the Management station on IP PolicyAccess Control violation. The trap includes in its varbind information about the slot where the event occurred. The id of the rule that was violated in the current rules table, and the quintuplet that identifies the faulty packet. A management application would display this trap and the relevant information in a log entry. This trap will not be sent at intervals smaller than one minute for identical information in the varbinds list variables.

DormantPort Fault

genPortSWRdFault, genPortGroup Id, genPortId

P330

SWITCH FABRIC

Warning

Dormant PortFault

Dormant Port Connection Lost on Module $2 Port $3;

This trap reports the loss of connection on a dormant port.

DormantPort Ok

genPortSWRdFault, genPortGroup Id, genPortId

P330

SWITCH FABRIC

Notification

Dormant PortOk

Dormant Port Connection Returned to Normal on Module $2 Port $3;

This trap reports the return of connection on a dormant port.

InlinePwrFlt

genGroup FaultMask, genGroupId, genGroup BUPSActivity Status

P330

POE

Error

InlinePwr Flt

Module $2 Inline Power Supply failure

This trap reports the failure of an inline power supply.

InlinePwrFltOK

genGroup FaultMask, genGroupId, genGroup BUPSActivity Status

P330

POE

Notification

InlinePwr FltOK

Module $2 Inline Power Supply failure was cleared

This trap reports the correction of a failure on an inline power supply.

WanPhysical AlarmOn

ifIndex, ifAdminStatus, ifOperStatus, ifName, ifAlias, dsx1Line Status

WAN

WAN

Critical

Wan Physical AlarmOn

Cable Problem on port $4

An E1/T1/serial cable was disconnected.

wanPhysical AlarmOff

ifIndex, ifAdminStatus, ifOperStatus, ifName, ifAlias, dsx1Line Status

WAN

WAN

Notification

wan Physical AlarmOff

Cable Problem on port $4 was cleared

An E1/T1/serial cable was reconnected.

wanLocal AlarmOn

ifIndex, ifAdminStatus, ifOperStatus, ifName, ifAlias, dsx1Line Status

WAN

WAN

Error

wanLocal AlarmOn

Local Alarm on interface $4

Local alarms, such as LOS.

wanLocal AlarmOff

ifIndex, ifAdminStatus, ifOperStatus, ifName, ifAlias, dsx1Line Status

WAN

WAN

Notification

wanLocal AlarmOff

Local Alarm on interface $4 was cleared

Local alarms, such as LOS, was cleared.

wanRemote AlarmOn

ifIndex, ifAdminStatus, ifOperStatus, ifName, ifAlias, dsx1Line Status

WAN

WAN

Error

wan Remote AlarmOn

Remote Alarm on interface $4

Remote alarms, such as AIS.

wanRemote AlarmOff

ifIndex, ifAdminStatus, ifOperStatus, ifName, ifAlias, dsx1Line Status

WAN

WAN

Notification

wan Remote AlarmOff

Remote Alarm on interface $4 was cleared

Remote alarms, such as AIS, was cleared.

wanMinor AlarmOn

ifIndex, ifAdminStatus, ifOperStatus, ifName, ifAlias, dsx1Line Status

WAN

WAN

Warning

wanMinor AlarmOn

Minor Alarm on interface $4

Low BER.

wanMinorAlarm Off

ifIndex, ifAdminStatus, ifOperStatus, ifName, ifAlias, dsx1Line Status

WAN

WAN

Notification

wanMinor AlarmOff

Minor Alarm on interface $4 was cleared

Normal BER.

AvEntFanFlt

entPhysical Index, entPhysical Descr, entPhySensorValue, avEntPhy SensorLo Warning

AVAYA-ENTITY

TEMP

AvEntFan Flt

Fan $2 is Faulty

This trap reports a faulty fan.

AvEntFanOk

entPhysical Index, entPhysical Descr, entPhySensor Value, avEntPhy SensorLo Warning

AVAYA-ENTITY

TEMP

Notification

AvEntFanOk

Fan $2 is OK

This trap reports the return to function of a faulty fan.

avEntAmbient TempFlt

entPhysical Index, entPhysical Descr, entPhySensor Value, avEntPhy SensorHi Warning, entPhysical ParentRelPos

AVAYA-ENTITY

TEMP

avEnt Ambient TempFlt

Ambient Temperature fault ($3)

This trap reports that the ambient temperature in the device is not within the acceptable temperature range for the device.

avEntAmbient TempOk

entPhysical Index, entPhysical Descr, entPhySensor Value, avEntPhy SensorHi Warning, entPhysical ParentRelPos

AVAYA- ENTITY

TEMP

Notification

avEnt Ambient TempOk

Ambient Temperature fault ($3) cleared

This trap reports that the ambient temperature in the device has returned to the acceptable range for the device.