For more information about these commands, see Avaya Branch Gateway G430 CLI Reference.
Command |
Description |
set qos bearer |
Permit the setting of VoIP QoS-bearer related parameters for the Media Gateway Processor and VoIP engines. The parameters you define using this command may conflict with the default QoS list (400). |
set qos control |
Define the source for QoS control parameters: local or remote |
set qos rsvp |
Set values for the RSVP parameters of the VoIP engines. The parameters that can be set include enabled/disabled, refresh rate (seconds), failure retry (y or n), and service profile (Guaranteed or Controlled). |
set qos rtcp |
Set values for RTCP parameters. The RTCP parameters that can be set include enabling or disabling RTCP reporting capability, setting the IP address of the monitor, setting the reporting period (the default is five seconds), and defining the listening port number. This command supports IPv4 and IPv6. |
set qos signal |
Set QoS signaling parameters (DSCP or 802.1Q) for the Media Gateway Processor. |
show qos-rtcp |
Display QoS, RSVP, and RTCP parameters for IPv4 and IPv6. |
