For more information about these commands, see Avaya Branch Gateway G430 CLI Reference.
Root level command |
Command |
Description |
interface (fastethernet|vlan) |
|
Enter the FastEthernet or VLAN interface configuration context |
|
ip vrrp |
Create a virtual router on an interface |
|
no ip vrrp |
Delete a virtual router |
|
ip vrrp address |
Assign an IP address to a virtual router |
|
no ip vrrp address |
Remove an IP address from a virtual router |
|
ip vrrp auth-key |
Set the virtual router simple password authentication key for the virtual router ID |
|
no ip vrrp auth-key |
Disable simple password authentication for the virtual router instance |
|
ip vrrp override addr owner |
Accept packets addressed to the IP addresses associated with the virtual router, such as ICMP, SNMP, and telnet (if it is not the IP address owner) |
|
no ip vrrp override addr owner |
Discard the packets |
|
ip vrrp preempt |
Configure a router to preempt a lower priority master for the virtual router ID |
|
no ip vrrp preempt |
Disable preemption for a virtual router instance. By default, preemption is enabled. |
|
ip vrrp primary |
Set the primary address used as the source address of VRRP packets for the virtual router ID |
|
no ip vrrp primary |
Restore the default primary address for a virtual router instance. By default, the primary address is selected automatically by the device. |
|
ip vrrp priority |
Set the virtual router priority value used when selecting a master router |
|
ip vrrp timer |
Set the virtual router advertisement timer value for the virtual router ID |
router vrrp |
|
Enable or disable VRRP routing globally |
show ip vrrp |
|
Display VRRP information |
