For more information about these commands, see the Avaya G430 CLI Reference.
Root level command |
Command |
Description |
interface (dialer|loopback|fastethernet|tunnel|vlan) |
- |
Enter theDialer, Loopback, FastEthernet, Tunnel, or VLAN interface configuration context |
- |
dynamic-cac-bbl |
Enable dynamic CAC on the interface and set the maximum bandwidth for the interface. The dynamic-cac bbl command includes the following parameters:
bbl. The bearer bandwidth limit (kbps). The MGC enforces this as the maximum bandwidth for the interface. If you set the bbl to 0, the interface can only be used for signalling. activation priority (optional). If dynamic CAC is activated on more than one active interface, the Branch Gateway reports the bearer bandwidth limit of the interface with the highest activation priority. You can set the activation priority to any number from 1 to 255. The default activation priority is 50. |
show dynamic-cac |
- |
Display information about the most recent dynamic CAC event. The show dynamic-cac command displays the following information:
Current RBBL. The current actual bandwidth available on the interface. Last event. The amount of time since the most recent update by the CAC process. Last event BBL. The interface’s bandwidth at the time of the most recent update by the CAC process. |
