For more information about these commands, see Avaya Branch Gateway G430 CLI Reference.
Command |
Description |
set utilization cpu |
Enable CPU utilization measurements |
show faults |
Display information about currently active faults |
show image version |
Display the software version of the image on both memory banks of the device |
show mg list_config |
Display the current hardware and firmware configurations for the installed Branch Gateway equipment |
show mgc |
Display information about the Media Gateway Controller with which the Branch Gateway is registered |
show module |
Display brief information about the media modules installed in the Branch Gateway |
show restart-log |
Display information about the last time the Branch Gateway was reset |
show system |
Display information about the Branch Gateway |
show temp |
Display the device temperature |
show timeout |
Display the amount of time in minutes the terminal remains idle before timing out |
show utilization |
Display information about CPU and memory usage on the Branch Gateway |
show voltages |
Display power supply voltages |
