For more information about these commands, see Avaya Branch Gateway G430 CLI Reference.
Root level command |
Command |
Description |
interface (fastethernet| dialer) |
- |
Enter the FastEthernet, or Dialer interface configuration context |
- |
priority-queue |
Enable or disable priority queuing mode in a FastEthernet interface. By default, priority queuing is off, and WFVQ is enabled on all FastEthernet interfaces for which traffic-shaping is enabled. |
- |
no priority-queue |
Disable priority queing and re-enable WFVQ. |
- |
queue-limit |
Set the size of any of the four priority queues, in packets, for a given interface or interface type. The default sizes depend on the bandwidth of the interface. |
- |
no queue-limit |
Restore the packet size to its default value, using the interface bandwidth |
- |
voip-queue |
Enable or disable custom queueing for VoIP traffic. |
- |
no voip-queue |
Disable VoIP queueing and re-enable WFVQ |
- |
voip-queue-delay |
Set the maximum query delay for which to estimate the high priority queue size necessary to meet the queuing delay. |
show queueing |
- |
Display the priority queue configuration |
