For more information about these commands, see Avaya Branch Gateway G430 CLI Reference.
Command |
Description |
clear ip route |
Delete all the dynamic routing entries from the routing table |
ip default-gateway |
Define a default gateway for the router |
no ip default-gateway |
Removes a default gateway for the router |
ip netmask-format |
Specify the format of subnet masks in the output of show commands |
ip redirects |
Enable the sending of redirect messages on the current interface |
no ip redirects |
Disable the sending of redirect messages on the current interface |
ip route |
Establish a static route |
no ip route |
Removes a static route |
ip routing |
Enable IP routing |
show ip route |
Display information about the IP routing table |
show ip route best-match |
Display a routing table for a destination address |
show ip route static |
Display static routes |
show ip route summary |
Display the number of routes known to the device |
show ip route track-table |
Display all routes with configured object trackers |
traceroute |
Trace the route packets are taking to a particular IP address by displaying the hops along the path The Branch Gateway traces the route by launching UDP probe packets with a small TTL, then listening for an ICMP time exceeded reply from a gateway. You can also trace the route inside a locally-terminated tunnel (GRE, VPN) |
