For more information about these commands, see Avaya Branch Gateway G430 CLI Reference.
Root level command |
Command |
Description |
interface fastethernet |
- |
Enter the FastEthernet interface configuration context |
- |
keepalive-icmp |
Enable the ICMP keepalive mechanism on an interface in the context of the interface. Use the no form of this command to deactivate the feature. Includes the following parameters:
destination ip address. The destination IP address for the keepalive packets. next hop MAC address. The next hop MAC address for the keepalive packets. This parameter is only relevant for the WAN Fast Ethernet ports. |
- |
keepalive-icmp failure-retries |
Set the number of consecutive failed keepalive packets necessary to set the interface’s keepalive status as down. The default value is 4. |
- |
keepalive-icmp interval |
Set the interval (in seconds) between keepalive packets. The default value is 5. |
- |
keepalive-icmp source-address |
Set the source IP address of the keepalive packets. The default value is the interface’s primary IP address. |
- |
keepalive-icmp success-retries |
Set the number of consecutive successful keepalive packets necessary to set the interface’s keepalive status as up |
- |
keepalive-icmp timeout |
Set the timeout (in seconds) for receiving the keepalive response. The default value is 1. |
- |
show keepalive-icmp |
Display information about the extended keepalive settings |
