Set the default action for a specific RIP distribution access list

Create a RIP distribution access list

Set the access list cookie

Copy the distribution access list

Set the name of the distribution list

Set the owner of the distribution list

interface (dialer|fastethernet|loopback|vlan|tunnel)

Enter the Dialer, FastEthernet, Loopback, Tunnel, or VLAN interface context

Set the authentication string used on the interface

Clear the password

Specify the type of authentication used in RIP v2 packets

Restore the default value, none

Enable learning of the default route received by the RIP protocol. The default state is talk-listen.

The default state is talk-listen.

Disable listening to default routes.

Enable or disable split-horizon with poison-reverse on an interface

Disable the poison-reverse mechanism

Specify the RIP version running on the interface

Set the RIP send and receive modes on an interface

Set the RIP to talk, that is, to send reports

Enable or disable the split-horizon mechanism

Disable the split-horizon mechanism. By default split-horizon is enabled.

Enable the RIP and enter the router configuration context or disable the RIP

Restore the default value by disabling RIP

Set or reset the interface RIP route metric value

restore the interface RIP route metric default value.

Apply a distribution access list for incoming or outgoing routing information in route updates or deactivate the list

Deactivate the distribution access list

Specify a list of networks on which the RIP is running

Remove an entry from the list of networks

Redistribute routing information from other protocols into RIP

Restore the default value, disable redistribution by RIP

Set RIP timers

Set the RIP timers to their default value

Display the contents of all current distribution lists or of a specific list

Display parameters and statistics of a given IP routing protocol