To determine the result of the set mgc list command, use the show mgc command. This command has the following output:
Field |
Description |
Gateway Mode |
Indicates whether the gateway is in Enterprise or Edge mode. If the IP address of the Primary or Secondary MGC Host start with the string SBC@ , then the gateway understands that the topology is in Edge mode. |
Registered |
Indicates whether Branch Gateway is registered with MGC (YES or NO). |
Active Controller |
Displays the IP address of the active MGC. If there is no active MGC (that is, if the set mgc list command failed to configure an MGC), this field displays 255.255.255.255. |
H248 Link Status |
Indicates whether the communication link between Branch Gateway and MGC is up or down. |
H248 Link Encryption |
Indicates whether the communication link with the MGC is encrypted or not, and the type of encryption (TLS, PTLS). |
SBC |
Displays the IP address of Avaya SBC. |
Management Link Status |
Displays the status of the MGSBC management link between Edge Gateway and Avaya SBC. |
PRIMARY MGC HOST |
IPv4 and IPv6 addresses of the primary MGC host. |
SECONDARY MGC HOST |
IPv4 and IPv6 addresses of the secondary MGC hosts |
