Installing PSUs

Last Updated : Feb 07, 2022 |

About this task

After the Branch Gateway chassis is installed, insert the PSU if you removed it before installation.

Procedure

  1. Place the PSU before the rear opening of the Branch Gateway and align both sides of the PSU with the interior guides.
  2. Slide the PSU slowly into the chassis, maintaining an even pressure to ensure that the PSU does not get disengaged from the guides.
  3. Close and tighten the two PSU captive screws, one on each side of the PSU.

Result



displays image for inserting the power supply unit

Related information
Removing power supply units