Changing the Service IPv4 or IPv6 Addresses for a High Availability configuration

Last Updated : Dec 02, 2019 |

About this task

Use this procedure to update the Service IPv4 or IPv6 Addresses for a 1+1 High Availability cluster:

Before you begin

Stop both High Availability server peers before changing the Service IPv4 or IPv6 Addresses. For details, see Starting and stopping the media server.

Procedure

  1. Navigate to EM > Cluster Configuration > High Availability.
  2. Update the IPv4 or IPv6 Service IP Address
  3. Update the IPv6 Service IP Address.
  4. Click Save.
  5. Click Confirm.
  6. Repeat Step 1 to Step 5 for the peer server.
  7. Start Avaya Aura® MS by navigating to EM > System Status > Element Status.
  8. Click Start.
  9. Click Confirm.
  10. Check the Operational State by navigating to EM > System Status > Element Status.
  11. If the Operational State is Lock or Pending Lock, select Unlock from the More Actions drop-down menu.
  12. Click Confirm.
  13. Repeat Step 7 to Step 12 for the peer server.
Related information
Starting and stopping the media server