Enabling SNMP traps

Last Updated : Sep 19, 2019 |

About this task

Perform the following procedure to configure the media server to send SNMP traps to all configured SNMP trap routes.

Avaya Aura® MS uses the Simple Network Management Protocol (SNMP) protocol to provide logs and events which may need administrative attention to a central management system.

Avaya Aura® MS reports the SNMP traps to the management system when a corresponding event triggers. For example, Avaya Aura® MS reports an SNMP trap when an alarm is raised.

Before you begin

Define one or more SNMP users, one or more SNMP trap destinations, and one or more SNMP trap routes.

Procedure

  1. On the Primary server navigate to EM > System Configuration > Network Settings > SNMP > Destinations.
  2. Optional Select SNMP Alarm Delivery Traps to enable sending a SNMP trap whenever an alarm is raised or cleared.
  3. Optional Select SNMP Event Log Delivery Traps to enable sending a SNMP trap whenever an event log is generated.
Related information
Adding a SNMP User
Adding a SNMP Trap Destination
Adding a SNMP Trap Route