Setting the network time source server

Last Updated : Sep 19, 2019 |

About this task

All the Avaya Aura® MS clusters must use a common network time source server so that the time across the nodes is synchronized. The system might encounter problems if the servers do not have the synchronized time.

Important:

If media servers are enrolled with System Manager, then the media servers and System Manager must use the same NTP server for time synchronization. The system time difference between the System Manager and the media servers must not exceed 10 minutes.

Perform the following procedure to configure Network Time Protocol (NTP) servers for each Avaya Aura® MS:

Procedure

  1. Navigate to EM > System Configuration > Network Settings > General Settings > General.
  2. In the Network Time Source Server field, enter the IP address or hostname of a up to three network time source (NTP) servers.
  3. Click Save.