dynamic-cac

Last Updated : Oct 25, 2015 |

Sets the dynamic CAC bearer bandwidth limit for the current interface. You can also specify an activation priority for the interface. In case more than one interface with a BBL value is up, the Branch Gateway reports the BBL of the interface with the highest activation priority.

Syntax

[no] dynamic-cac bbl [activation_priority]

Parameters

Parameter

Description

Possible Values

Default Value

bbl

The bearer bandwidth for the current interface

0-100,000,000 Kbits/sec

-1

activation_ priority

The priority value of this interface

1-255

50

User level

read-write

Context

interface:Serial (DS1 PPP L2, DS1 PPP L2-L3, DS1 FR-SUB L2, DS1 FR-SUB L2-L3, USP PPP L2 USP PPP L2-L3), FastEthernet (L2, L2-L3, PPP L2, PPP L2-L3), Tunnel (L2, L2-L3), Dialer (L2, L2-L3), Loopback (L2, L2-L3), VLAN (L2, L2-L3)

Example

To set dynamic CAC on FastEthernet interface 10/3, with a bearer bandwidth limit of 128 and an activation priority of 100:

Gxxx-001(super-if:FastEthernet 10/3)# dynamic-cac 128 100